Roll Lifting C Hook

Type: Coil Handling Equipment,C hook,C-type spreader, Roll Lifting
Application: Roll Lifting C Hook is widely used in hot-rolled strip mill and cold-rolled strip mill, as well as in stations, freight yards, wharves and large-scale coil users

Product Introduction

Roll Lifting C Hook is mainly used for horizontal lifting of rolling plate. Because of its appearance similar to "C", it is called C-type sling. The process of lifting and installation, simple and reasonable structure, flexible operation, convenient use and safe and reliable lifting. Roll Lifting C Hook is mainly composed of spreader and counterweight iron: 1. Spreader: it is the main part of C-type hook, which is made of steel plate (high-quality low-alloy steel) and steel pipe. The cross-section is box type structure, with good bending and torsion resistance. The weight of the sling is light and the service life is long. 2. Counterweight iron: it can adjust the balance of spreader to make the center of gravity of spreader and object in the same line.

Technical Data

Roll Lifting C Hook
Coil weight Coil width Coil inner diameter Hook weight
t mm mm Kg
3.2 ≤300 ≥400 85
350 ~500 ≥400 500
5 750 ~900 ≥400 350
900 ~1100 ≥500 1100
1100 ~1300 ≥500 1300
10 750 ~900 ≥500 570
900 ~1120 ≥500 1120
1100 ~1300 ≥500 1300
1300 ~1500 ≥500 1500
16 900 ~1100 ≥600 1140
1100 ~1250 ≥600 1250
25 900 ~1100 ≥600 1800
1100 ~1300 ≥700 1300
32 1400 ~1660 ≥700 2950
Customized solutions and designs are provided according to your actual needs.

Application

Roll Lifting C Hook is widely used in hot-rolled strip mill and cold-rolled strip mill, as well as in stations, freight yards, wharves and large-scale coil users

Routine maintenance

  • 1
    The used roll lifting C hook must be placed on a special shelf, stored in a ventilated, dry and clean workshop, and kept by a specially assigned person.
  • 2
    The surface of roll lifting C hook shall be protected from rust and shall not be stored in acid, alkali, salt, chemical gas and humid environment.
  • 3
    Roll lifting C hook is not allowed to be stored in high temperature area.
  • 4
    Clean the rotating parts regularly and apply lubricating oil regularly to prevent dry friction and jamming

Custom

C-type spreaders is suitable for steel coil handling, steel coil tempering, warehouse storage, stacking, transportation and loading, etc. Dejuncranes can design and produce the spreader according to your requirements.

Send for Prices

If you need the price or information about our hoists and cranes, please send an inquiry. We will reply you as soon as possible.

Home Tel Mail Inquiry