Single Girder Rubber Tyred Gantry Crane

Type Rubber tyred single girder gantry crane
Capacity 0.5 tons-32 tons(customized)
Lifting height 3 m- 50m(customized)
Working class A3,A4
Applications various industries, such cargo yard or road bridge construction, etc.

Product Introduction

The rubber tyred single girder gantry crane is used together with the electric wire rope hoist, which runs on the main beam. Generally, the lifting weight is 3-20 ton, the span is 7-30 m, and the working temperature is -20-40 degrees.
Single beam gantry crane is mainly composed of portal frame, namely main single beam, leg, bottom beam, lifting mechanism, walking mechanism, electrical control.It can be designed as two boom, one boom and no boom according to the customer's lifting requirements and using environment.

Technical Data

Single Girder Rubber Tyred Gantry Crane
Working Class A3,A4
Capacity t 0.5~32
Span m 3~35
Lifting Height m 3~50
Lifting Speed m/min 0.33~8,Single or Dual Speed
Trolley Travelling Speed m/min 2~30,Single or Dual Speed
Crane Travelling Speed m/min 2~20,Single or Dual Speed
Control Method Ground or Cab Control
Power Supply 380V 50HZ 3Phase or Customized
Temperature -20~60
Protection Grade Pendent/Remote Control
Girder Type Truss or Box Girder
The above are standard parameters, and customized solutions and designs are provided according to your actual needs.

Application

The rubber tyred single girder gantry crane suitable for manufacturing industry, steel industry, energy industry, etc.

Features

  • 1
    Flexible operation, can run in all directions.
  • 2
    Fast running speed, high efficiency, save time.
  • 3
    Can be used in different workplaces.
  • 4
    The main material of the tire is rubber, which has good elasticity and reduces the bumpy feeling during driving.
  • 5
    The main beam, ground beam, legs, and end beams are made of Q235B carbon structural steel seamlessly once.
  • 6
    Overload protection device, when the lifting weight is higher than the rated lifting weight, a warning will occur when overloading.
  • 7
    Buffer. polyurethane buffer, installed on the side of the hoist and the end beam to prevent collision and derailment.
  • 8
    The limit switch is used to prevent the crane hook from being too high or too low.
  • 9
    Use low-voltage protection when the power supply is unstable.
  • 10
    Equipped with an emergency stop button, which can be used when the equipment is in an emergency.
  • 11
    Current overload protection system.
  • 12
    Track obstacle cleaner. Clear some obstacles that fell on the track.
  • 13
    The hook can rotate 360 degrees.
  • 14
    The power supply: cable and drum.
  • 15
    Control method: pendent contro, remote control,and cabin control.
  • 16
    The motors and electrical appliances of wire rope hoist and gantry cranes can be explosion-proof to be suitable for the oil and gas industry.
  • 17
    The limit switch is used to prevent the crane hook from being too high or too low.
  • 18
    Simple structure and easy installation.

Custom

Send for Prices

If you need the price or information about our hoists and cranes, please send an inquiry. We will reply you as soon as possible.

Home Tel Mail Inquiry